NGS WILDTRAP 3 Manual Del Usuario página 10

USER'S MANUAL
Menu button
By pressing the menu button on the upper panel, we can
select different parameters and modify them using the
VOLUME/MULTI wheel. By default, this wheel modifies the
general volume of the device between the values 0 and 60,
where 0 is the minimum and 60 is the maximum. If before
turning the wheel, however, we press the menu button
and select one of the following options, we can vary its
parameters:
BASS: Modifies the values of the low frequencies
TREB: Modifies the values of the high frequencies
DRI: Activates or deactivates the SUPER BASS option
(super bass)
Lights: We can select the following lighting options
R: Red / G: Green / B: Blue
RG: Red and blue / GB: Green and blue
RGB: Red, green and blue
AUTO: Varies the colours depending on the rhythm of the
music
DEMO: Change of colours in a predetermined cycle
OFF: Without lights
10
Headphones option
By pressing the PHONES MODE button we can select
the output of the music we are listening to through the
headphones connected to the PHONES output on the upper
panel. This option is very useful when we are playing music
and we want to mix two songs between the INPUT A and
INPUT B input ports. This way, we can listen to one channel
on the speakers and the other on the headphones in order to
make the transition from one song to another like a true DJ.
The options available to listen with headsets are:
INPUT A: We listen to the music from input A
INPUT B: We listen to the music from input B
INPUT AB: We listen to both inputs at the same time
Microphone and guitar inputs
On the rear panel of the speaker we have a microphone
input and another for guitar. Both inputs have their own
volume control, just under the connector, and in addition,
the microphone input has a wheel to control the microphone
echo level.