NGS WILDTRAP 3 Manual Del Usuario página 8

USER'S MANUAL
ON / OFF
Connect one end of the power cable to the power supply
and the other end to the AC INPUT port on the back of the
speaker.
Turn the POWER switch to the ON position.
To put it in Standby, press the STANDBY button on the upper
panel. Press it again to turn it on.
OPERATION
Input channel and volume selection
The sound system has two input channels, INPUT A and
INPUT B.
INPUT A consists of the following sound inputs: Bluetooth,
USB, audio input and FM radio.
INPUT B consists of the following sound inputs: USB and
line in.
8
How to select each input
Press the INPUT A or INPUT B buttons on the upper panel to
select the desired audio input.
With the VOL A and VOL B volume levers, you can select the
volume of the channel you want to hear from the speaker.
In addition, you can control the main volume by turning the
VOLUME/MULTI wheel in the centre of the upper panel.
Note: You can select the tempo of the music (only in USB
mode) from the USB A TEMPO and USB B TEMPO wheels on
the rear panel.
Bluetooth Connection
Select the BT option at input A (INPUT A).
Turn on the Bluetooth option on your mobile device (phone,
tablet ...) and select the NGS WILDTRAP device to pair it.