NGS WILDTRAP 3 Manual Del Usuario página 9

ENGLISH
FM Radio
Select the Radio option at input A (INPUT A).
Press the play/pause button on the control or the AUTO
button on the remote control to perform an automatic
search and store the captured stations.
Press the CHANNEL+ / CHANNEL- buttons on the remote
control, or press and hold the FDD / REW buttons for 2
seconds to move between the stored stations.
Line In Input and Audio Input
Audio Input: This sound input located on the rear panel
corresponds with input A (INPUT A). Press the INPUT A
button until AUX A appears in the display. Connect one end of
an audio cable to the back and the other end to an external
audio source.
Line In: This sound input located on the upper panel
corresponds with input B (INPUT B). Press the INPUT B
button until LINE appears in the display. Connect a 3.5mm
audio jack cable, with the other end connected to an external
audio source.
Sound output
The speaker system has an audio output option to connect
another speaker in series. Just connect another sound
system to the "LINE OUT" output on the back of the speaker.
The output will be the same as that playing on the first
speaker, either input A, B or both at the same time.
DJ Effects
The equipment has different predetermined DJ sounds.
4 buttons on the upper panel have their respective recorded
sounds and will play when these buttons are pressed:
CLUB / MARVEL / LASER / PRO
In addition, the BOMB EFFECT central wheel generates a
bomb effect. If we gradually increase the lever we will hear a
progressive siren that will finish with an explosion when the
lever reaches the upper limit.
By pressing the PARTY EFFECT button, we can select other
DJ effects that we will see on the screen:
SCRATCH, REVERB, BEAT BOX, YEAH, BRING IT, GEYR & COME ON
Once the desired effect has been selected, we can hear it by
turning the VOLUME/MULTI wheel.
We can select the volume of the DJ effects from the DJ
EFFECT VOL wheel on the rear panel.
9