Overmax X-Blast Manual De Usuario página 15

4.
Car
5.
4 x Clasp, 2 x Nut
The power adapter is not supplied. Use the power supply of the following parameters:
Input: 100-240V~50/60Hz, Max 0.2A
Output: 5V 1A
2. Description of controller (see fig. 2):
1.
Forward
2.
Brake/Reverse
3.
Control knob
4.
Wheel turn adjustment
5.
Reversed direction of control knob operation
6.
On/off switch
7.
Reversed direction of throttling valve operation
8.
Power/connection LED
9.
Toe-in adjustment
10. Acceleration adjustment
Opis części samochodu:
1.
On/off switch
2.
Motor
3.
Battery connector
3. How to charge battery (see fig. 10):
Charge the battery before use.
• Switch the car off.
• Disconnect the battery from the car before charging.
• Connect the battery plug to USB cable.
• Connect USB cable to PC or USB adapter.
• Charging takes about 150 minutes. A green light on the charger suggests
the battery is connected.
• Disconnect the battery from charger and insert it in the car.
EN