7 Replacement of the batteries
When the digital selector range is significantly reduced and/or 10 rapid beeps are emitted when switched on, this
means that the batteries are flat and require replacement.
The digital selector contains two CR2430 lithium batteries.
If the DS1 is used in freezing temperatures (below -10°C) flat battery signals may be given even if the batteries are
still partially charged.
1) Unscrew the
retaining screw
5) Replace the
battery cap
8 Maintenance and Disposal
DS1 does not require any particular maintenance.
This product is made of various types of materials, some of which can be recycled while others must be disposed
of. Enquire about the recycling or disposal systems available in compliance with regulations locally in force.
Warning: some electronic components may contain polluting substances; do not pollute the environment.
2) Unhook the DS1
from the support
6) Hook the DS1
to the support
3) Unscrew the battery cap
7) Tighten the
retaining screw
4) Replace the old batteries
with new ones
5