• With the herb grinder (H)*, you can
chop ingredients like onions, garlic,
meat (cut into pieces) and dry fruits in
a few seconds and make crumbs
(rusk) by using the pulse function. Do
not use the herb grinder for liquid
preparations (fruit juices, etc.)
• These accessories are equipped with
a bowl (I)* that prevents access to the
blades during use.
1- Invert the bowl (I)*and place the
ingredients into it.
2- Position the blade unit by aligning the
slots on the blade unit with the tabs
on the bowl
accessory by rotating the blade unit
through a quarter turn in the
anticlockwise direction (fig 3).
Caution: leaks can occur if the
accessory is not locked correctly.
3- Rotate the assembly accessory (F)*,
(G)* or (H)* and position it on the
motor unit (A).
Ingredients
Dried apricots
Onions cut into pieces
Shelled almonds / hazelnuts
Peppercorns
Coriander seeds
Nutmeg
Coconut shelled
(I) (fig 3). Lock the
Quantity
4- Then turn the assembled accessory
(F)*, (G)* or (H)* through a quarter
turn to the left (fig 4) to lock onto the
motor unit (A)..
5- Plug in the appliance and turn the
On/Off button (B) to position "1" or
apply a few pulses on the "pulse"
position. Hold the bowl (I)* when
the appliance is running. To stop the
blender, turn the On/Off button (B)
to "0".
6- Unlock the accessory by rotating it
through a quarter turn in the
anticlockwise direction. Remove the
assembled accessory (F)*, (G)* or
(H)* from the motor unit.Turn it over
on the worktop before unlocking
the blade unit (F)*, (G)* or (H)*
from the bowl (I)* in the reverse
order of the assembly. You can then
empty the preparation in the bowl.
The colour of the bowl may change
after blending certain very hard
ingredients (cloves, cinnamon, etc.).
*depending on model
Operating time
(max.)
60g
60g
60g
60g
45 to 60 sec
40g
45 to 60 sec
15 to 20 sec
1 to3
15 to 20 sec
40g
8
3sec
In pulses
In pulses
In pulses
In pulses
Accessory
H*
H*
H*
F*
F*
G*
G*