P73570-F5U008-PC-AM.qxd
6/1/01
Combo Card Installation
Before You Begin:
Please read this manual thoroughly before attempting to install
this device. Installation of this device requires you to open your
computer and insert the device into a PCI slot on the
motherboard. If you do not feel comfortable or are unable to
perform the tasks described in this manual, contact a qualified
computer specialist to have the device installed professionally.
You Will Need:
•
Phillips screwdriver
•
Static ground strap (recommended)
•
Windows
98/98 SE/2000/Me CD-ROM (may not be
®
required)
1. Turn the computer off and
disconnect all devices and cables.
Warning
Static electricity can damage computer components. If not
using a static ground strap, be sure to touch any bare metal
surface of your computer case to discharge yourself of any
static electricity before touching the FireWire/USB Combo Card
or any electronics inside of your computer case.
9:30 AM
Page 2
2
Combo Card Installation
2. Open the case of your
computer by removing
the cover. Refer to your
computer user manual
for details on how to
do this.
3. Locate a free PCI slot in your computer, or remove the
PCI card that you will replace with the Belkin
FireWire/USB Combo Card. If not already removed,
remove the metal plate that covers the rear bracket
corresponding to the PCI slot you have chosen.
Rear Brackets
PCI Slots
3
(continued)
En