Epson MOVERIO Pro Smart BO-QC2000 Manuales De Usuario página 10

❏
Do not continue using this product if it emits smoke, strange odor, or unusual noise, or
is otherwise in an abnormal state. Doing so may cause electric shock or fire. If an
abnormality occurs, immediately disconnect the plug from the outlet and then contact
your dealer or a Seiko Epson service center for advice.
❏
Do not continue using this product if foreign matter or water or other liquid gets inside.
Doing so may cause electric shock or fire. Immediately disconnect the plug from the
outlet and then contact your dealer or a Seiko Epson service center for advice.
❏
Check that no foreign material or liquid, such as oil or water, is attached to the charge
terminal. The charge terminal may be damaged, or the battery may not be fully
charged.
❏
Do not use metal, such as a wire, to connect (short-circuit) the charge terminals. Also,
do not carry or store this product with metal necklaces, hairpins, or the like. Doing so
may cause heat, smoke, ruptures, fire, or leaks.
❏
Do not expose the charge terminals to water. Doing so may cause heat, smoke,
ruptures, fire, or leaks.
❏
Do not disassemble any part unless instructed to do so in this manual.
❏
Never attempt to repair this product yourself as doing so is dangerous.
❏
Do not use this product in a location where flammable gas, explosive gas, etc. may be
present in the atmosphere. Do not use aerosol sprayers containing flammable gas
inside or around this product. Doing so may cause fire due to the gas igniting.
❏
Do not connect cables in ways other than those mentioned in this manual. Doing so
may cause fire. It may also damage other devices.
❏
Do not touch any part inside this product unless instructed to do so in this manual.
Doing so may cause electric shock or burns.
!
CAUTION:
❏
Do not install or store this product in an unstable location or a location where it will be
subject to vibration from another device. Doing so may cause this product to fall or tip
over, which may lead to an injury.
❏
Do not stand on or place heavy objects on this product. Doing so may cause this
product to fall or break, which may lead to an injury.
❏
Insert the batteries and install the cables, and optional products the correct way in
accordance with the proper procedures. Failure to do so may cause fire or injury.
Follow the instructions in this manual to insert/install them properly.
❏
Be sure to disconnect all the cables from the product before you move it. Failure to do
so may cause damage to the cables, which may lead to electric shock or fire.
❏
Do not place this product in a location that is very hot, humid, or dusty. Doing so may
cause a failure shock or fire.
Cautions on the Power Supply
Read the manual supplied with the AC adapter carefully before using the accessory AC
adapter.
10