Installation Steps; Care And Cleaning - LUND AVS Instrucciones De Instalación

Installation Steps

Clean painted surface of hood where scoop will at-
3
Position scoop on hood and apply pressure to exposed tape.
In its final position, remove remaining tape by pulling on free
ends. Apply pressure to all edges to ensure adhesion.
5

Care and Cleaning

• Wash only with mild soap & dry with a clean cloth.
Congratulations!
You have purchased one of the many quality Auto Ventshade™ branded products offered by Lund International, Inc. We take the utmost
pride in our products and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your
product is top quality in terms of fit, durability, finish and ease of installation.
™ Auto Ventshade
NOTE: Actual application may vary slightly from illustrations.
tach with alcohol pad.
800-241-7219 • Visit us at lundinternational.com
© 2012 Lund International, Inc. All rights reserved.
, the Auto Ventshade logo and the AVS
TM TM
Peel back 2" of tape liner from each end of front flange.
4
Remove adhesive tape to adhere inserts to hood scoop.
6
Lund International
logo are trademarks of Lund International, Inc.
TM
Page 2 of 2
2"
5cm
If applicable