English - DeWalt DE7023 Manual De Instrucciones

E N G L I S H
MITRE SAW LEG STAND DE7023
Congratulations!
You have chosen a D
E
experience, thorough product development and
innovation make D WALT one of the most reliable
E
partners for professional users.
Technical data
Length
Length (with bars extended)
Height
Maximum working load
Weight
The following symbols are used throughout this
manual:
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-
observance of the instructions in this
manual.
Manufacturer's declaration
DE7023
D WALT declares that this unit has been designed in
E
compliance with 98/37/EEC.
This unit must not be put into service until it was
established that the Power Tool to be connected to
this unit is in compliance with 98/37/EEC (identified
by the CE-marking on the Power Tool).
Director Engineering and Product Development
Horst Großmann
D WALT, Richard-Klinger-Straße 40,
E
D-65510, Idstein, Germany
12
WALT product. Years of
DE7023
mm 1830
mm 3290
mm 820
kg 227
kg 19.8
Safety instructions
Observe the safety regulations in the instruction
manual of the Power Tool to be connected to
this attachment. Also observe any applicable
additional safety rules. Read the following safety
instructions before attempting to operate this
product.
Keep these instructions in a safe place!
General
1 Keep work area clean
Cluttered areas and benches can cause accidents.
2 Keep children away
Do not let children come into contact with the
tool or its attachments. Keep all people away
from the work area.
3 Dress properly
Do not wear loose clothing or jewellery. They can
be caught in moving parts. Preferably wear
rubber gloves and non-slip footwear when
working outdoors. Wear protective hair covering
to keep long hair out of the way.
4 Wear safety goggles
Also use a face or dust mask in case the
operations produce dust or flying particles.
5 Beware of maximum sound pressure
Take appropriate measures for the protection of
hearing if the sound pressure of 85 dB(A) is
exceeded.
6 Stay alert
Watch what you are doing. Use common sense.
Do not operate the tool when you are tired.
7 Use appropriate tool
The intended use is laid down in this instruction
manual. Do not force small tools orattachments
to do the job of a heavy-duty tool. The tool will
do the job better and safer at the rate for which it
was intended. Warning! The use of any
accessory or attachment or performance of any
operation with this tool, other than those
recommended in this instruction manual may
present a risk of personal injury.