English (Original Instructions); Definitions: Safety Guidelines; Package Contents - DeWalt DWE74911 Traducido De Las Instrucciones Originales

EngLIsh
HEAVY-DUTY ROLLING TABLE SAW STAND
DWE74911
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Maximum working load
Width (Extended)
Width (Folded)
Height (Extended)
Height (Folded)
Weight

Definitions: Safety Guidelines

The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.

CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.

Denotes risk of electric shock.

Denotes risk of fire.
General Safety Warnings

WARNING: Read all safety warnings and all
instructions enclosed with the saw stand and the
power tool to be mounted. Failure to follow the
warnings and instructions may result in electric shock, fire
and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
General Safety Instructions for Table
Saw Accessories

WARNING: To reduce the risk of personal injury:
• Follow the mounting instructions carefully.
Fasten the saw to the stand securely as
12
All manuals and user guides at all-guides.com
WALT one of the
e
DWE74911
kg 68
mm 1020
mm 650
mm 905
mm 514
kg 15
instructed. Proper assembly is important to prevent
the risk of a collapse of the saw stand.
• Ensure all stand fasteners are securely fastened
and that all stand mechanisms are in proper
working order before mounting or operating the
table saw. Proper assembly is important to prevent
the risk of a collapse of the saw stand.
• Attach the power tool securely to the saw stand
before using it. Sliding off of the power tool on the
saw stand can lead to loss of control.
• DO NOT use the stand on uneven surfaces. DO
NOT use the stand with the legs folded and stand
sitting on the ground. The stand is designed to
be used on a flat, stable surface. If the saw stand
can slide around or wobbles, the power tool or the
workpiece cannot be evenly and securely guided.
Pull the plug from the mains receptacle and/or
•
remove the battery from the power tool before
making adjustments on the tool or changing tool
accessories. Unintentional switching on of the power
tool is the cause of many accidents.
• Ensure that long and heavy workpieces do not
affect the balance of the saw stand. Long and/or
heavy workpieces must be supported at the free end.
• Keep your fingers clear of the hinge points while
folding the legs of the saw stand. Danger of fingers
being crushed or contused.
• Ensure all stand fasteners are securely fastened and
that all stand mechanisms are in proper working order
before operating the table saw.
• Follow the mounting instructions carefully. Fasten the
saw to the stand securely as instructed.
• DO NOT modify or use stand for operations for which
it is unintended.
• DO NOT use the stand on uneven surfaces. DO NOT
use the stand with the legs folded and stand sitting on
the ground. The stand is designed to be used on a flat,
stable surface.

Package Contents

The package contains:
1 Stand, right side
1 Stand, left side
2 Wheels
1 Rear axle
1 Kickstand assembly
2 Tube plugs
1 Handle assembly
2 Handle feet
2 Carriage head bolts
2 M6 Pan head bolts