Publicidad
3
Snug mounts to crossbar by tightening
the
Strap Tensioner Bolt
side of the Universal Mount using one of the
provided M5 Security Allen Wrenches.
Overtightening can damage crossbar and mount
4
Repeat steps 2 - 3 for second SWITCH
SWITCH
racks are aligned with one another.
TM
Always check that SWITCH racks are secure prior to travel.
Using the SWITCH
1
Push end cap upward on each rack to release
and open SWITCH
on the opposite
rack
TM
ski racks.
TM
, being sure both
TM
Publicidad
