Product Specifications - Matrix E1x Manual Del Usuario

MAINTENANCE
1. Any and all part removal or replacement must be
performed by a qualified service technician.
2. DO NOT use any equipment that is damaged and or has worn or broken parts.
Use only replacement parts supplied by your country's local MATRIX dealer.
3. MAINTAIN LABELS AND NAMEPLATES: Do not remove labels for
any reason. They contain important information. If unreadable or
missing, contact your MATRIX dealer for a replacement.
4. MAINTAIN ALL EQUIPMENT: Preventative maintenance is the key to
smooth operating equipment as well as keeping your liability to a
minimum. Equipment needs to be inspected at regular intervals.
5. Ensure that any person(s) making adjustments or performing maintenance
or repair of any kind is qualified to do so. MATRIX dealers will provide
service and maintenance training at our corporate facility upon request.
WARNING
To remove power from the Elliptical, the power cord
must be disconnected from the wall outlet.

PRODUCT SPECIFICATIONS

Max User Weight
Product Weight
Shipping Weight
Overall Dimensions (L x W x H)*
* Ensure a minimum clearance width of 0.6 meters (24") for access to and passage around MATRIX equipment.
Please note, 0.91 meters (36") is the ADA recommended clearance width for individuals in wheelchairs.
16
E1x/E1xe Elliptical
182 kg / 400 lbs
140 kg / 308 lbs
160 kg / 352 lbs
175 x 74 x 173 cm / 68.9" x 29.1" x 68.1"
MAINTENANCE SCHEDULE
ACTION
Unplug the unit. Clean entire machine using water and a mild soap or
other Matrix approved solution (cleaning agents should be alcohol and
ammonia free).
Inspect the power cord. If the power cord is damaged, contact Customer
Tech Support.
Make sure the power cord is not underneath the unit or in any other area
where it can become pinched or cut during storage or use.
Check all connecting joint areas for tightness of bolt assemblies.
Ensure that there is little, or no free play at all joint assemblies once bolts
have been tightened. Installation of washer kits may be required if free
play does not come out from tightening bolts.
Unplug the unit and remove plastic covers. Lubricate ball joint where the
Link Arm and Dual Action Handlebar join together. A grease gun, with
a needle fitting adapter is required for this (Matrix recommends using
Superlube brand grease with PTFE {Teflon} additive).
Unplug the unit and remove plastic covers. Lubricate Acme screw on
incline motor (Matrix recommends using Superlube brand grease with
PTFE {Teflon} additive).
For XE consoles, enter service mode and select 'test'. Select 'touch
calibration' and then select 'start'. Follow the on-screen prompts and touch
the screen where indicated.
FREQUENCY
DAILY
DAILY
DAILY
QUARTERLY
QUARTERLY
QUARTERLY
QUARTERLY
QUARTERLY