OPERATION
1. Getting started
1.1 Insert the power cord into an electrical outlet.
Please make sure the operating voltage is the same as the parametric label.
After inserting into the power outlet, the control panel will light up for a second then the Power indicator
will be Red.
1.2
Power On
• Press the button to process power.
• The Auto mode and UV functions will automatically turn on when the unit is first powered on.
• The Air Quality Indicator will flash for 15 seconds. Meanwhile, it starts to detect the PM2.5 value and
display the number.
2. Modes
2.1
Auto Mode
• It goes into Auto Mode when power on or when you press the Fan Mode button and choose the
Auto Mode.
• In Auto Mode, the Auto Mode indicator will glow and the unit will adjust the fan speed depending
on the current air quality index.
• It will increase the fan speed automatically to improve air quality in the room until it returns to a
healthy level.
2.2
Manual Mode
• Press the Fan button
cycle between Auto→1→2→3→4→5→Sleep Mode→Auto...
• When Manual Mode is selected, Auto Mode is automatically disabled.
NOTE: The air quality indicator changes according to the corresponding PM2.5 value.
WARNING
Follow these instructions to reduce the risk of
serious injury or death and to reduce the risk
of damaging the unit.
to enter the manual mode. Five fan speeds are available. Each press will
9