Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

3.
Timer
• Press the Timer button
• Pressing the timer button will cycle through 1 hr → 2 hrs → 3 hrs → . ... → 24 hrs → 0 hr etc.
If the timer is set at 0 hr or the unit is restarted,the timer setting will be reset.
• There will be a 3 second delay after setting the timer.
4.
UV Light
• The UV function will automatically turn on when the unit is first powered on. Press and hold the
Timer button
for 5 seconds to deactivate the UV function if you don't need it.
• Press and hold the Timer button
• UV-C refers to ultraviolet light with wavelengths between 200-280 nanometers (nm). It can be used
for destroying harmful microorganisms in the air.
• Airthereal AGH43 0 Air Purifier has passed the stringent ETL testing requirements.
• The UV-C LED light is rated at 50,000 hours, or slightly longer than 5 years.There's no need to
replace the UV light or perform maintenance.
5.

Child Lock

• Press and hold the Fan button
buttons are unable to be used.
• Press and hold the Fan button
10
to select the timer length.
for 5 seconds until the UV light glows to activate the UV function.
for 5 seconds until the Child lock light glows. At this time, other
for 5 seconds again to unlock.

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido