Memory Function; Battery Replacement - Chicco THERMO DISTANCE Manual Del Usuario

MEMORY FUNCTION

" " - "
SELECTING THE MEASUREMENT SCALE (°C/°F)

BATTERY REPLACEMENT

With the thermometer on, press the memory button
(MEM) twice. The display will show the last measure-
ment performed, accompanied by the "
The following symbols will appear alongside each me-
mory item:
"
" " indicating the body temperature
" " indicating the object temperature
Press the ON/MEM button repeatedly to view the me-
mory items in sequence.
This thermometer is capable of storing a series of up to
10 of recent readings.
Hold down the "MEM" button for at least 3 seconds to clear
the records stored in the device's memory. An acoustic signal
will sound and the screen will display the symbols shown in
the figure.
The thermometer is configured to perform measurements
in Celsius (°C) by default. In order to change the unit of
measure from °C to °F, make sure that the thermometer
is on and press the "MODE" and "MEM" buttons simul-
taneously. The selected unit of measure will be saved for
any subsequent measurements. The same procedure can
be used to change the unit of measure from °F back to °C.
When the battery's charge is low, the
pear on the display. Although the thermometer can con-
tinue to be used, the battery will have to be replaced as
soon as possible. Once the battery has been entirely drai-
ned, the "Lo" symbol will appear on the display as well.
Open and remove the battery compartment's cover.
Remove the drained batteries and insert 2 new 1.5V
"AAA" alkaline batteries into the battery compartment,
respecting the proper polarity as shown in the figure.
Reposition the battery compartment's cover.
17
". symbol.
symbol will ap-