Monogram ZDT985SPNSS Manual Del Propietário página 11

Use a Rinse
Agent
Leak
Protection
49-4000215 Rev. 2
High quality rinse agents such as
Platinum™ Power Dry™ Rinse Aid or
Finish Jet-Dry Rinse Aid are designed
® ®
for great drying action and to protect against
spots and film build-up on your dishes, glasses,
flatware, cookware, and plastic.
Filling the Dispenser
The rinse agent dispenser holds
ml) of rinse agent. Under normal conditions,
this will last approximately one month -
depending on setting.
Make sure the dishwasher door is fully open.
1
Open the Rinse Agent dispenser door.
2
Slowly add rinse agent until the cup is full. You
3
may need to pause several times to allow rinse
aid to settle. NOTE: Indicator window does
not light up.
4 Clean up any spilled rinse agent with a damp
cloth to prevent foam from forming inside the
dishwasher.
Close the Rinse Agent dispenser door.
5
If a leak is detected, the dishwasher will drain
and the cycle will stop. The display will show
"LEAK DETECTED". Contact us for service.
Using the Dishwasher
Cascade Rinse Aid Setting
®
The amount of rinse agent released into the final
wash can be adjusted. If water drops or hard
water spots remain on dishes after the dry cycle,
increase the setting.
3.5 oz. (104
To adjust the setting
Open the Rinse Agent dispenser
the adjuster clockwise to increase the amount
of rinse agent, counterclockwise to reduce the
amount of rinse agent.
Dishwasher
Rinse
agent
adjuster
door; then turn
Clockwise to Counterclockwise
reduce water to reduce foaming
drops and hard
water spots
11