Installaton; Dimensions; Supplies Required - Bradley S19-270HD Instalación

Installation
Installation
NOTICE! Avoid cleaners containing organic solvents, alcohols, and hydrocarbons.
Rinse with water after cleaning.

Supplies Required:

• Piping to ½" NPT water supply inlet on unit
• Pipe sealant
• Sign-mounting hardware
Step 1: Attach eyewash
Apply pipe sealant (supplied by installer) to all male-threaded pipe joints. The top of the eyewash heads should be
positioned a minimum of 33" and a maximum of 45" from the floor and 6" from the nearest obstruction.
1. Select the desired location for the eyewash on the sink deck (or wall, depending on unit purchased) and drill a ⁷⁄₈" diameter
hole and a ¼" diameter hole.
2. Secure the assembled unit to the deck (or wall) with the nut and washer provided as shown on page 4.
Step 2: Connect water supply
1. Connect the water supply using flexible hose (supplied by installer) with ½" NPT threaded end.
2. Mount the safety sign to wall or pipe using sign-mounting hardware supplied by installer.
3. Open the water supply lines. Test for leaks and adequate water flow.
S19-270HD, S19-270HW, S19-280D, S19-280W
(deck-mounted unit shown)
Bradley • 215-1408 Rev. M; ECN 12-05-003C
S19-270HD, -270HW, -270JD, -270JW, -280D, -280W, -290D, -290W
3⁹⁄₃₂"
(96mm)
7⁹⁄₁₆"
(192mm)
3³⁄₈"
(85mm)
¾" (19mm)
9½" (240mm)
standard models
19¹⁄₈" (486mm)
barrier free
models
Deck or Wall
29⁵⁄₈"–41⁵⁄₈"
(752mm–1058mm)
to floor
10/30/2012
2⁷⁄₈"
(73mm)
Ø ¼"
Ø ⁷⁄₈"
(setscrew)
(shank)
2" (51mm)
3³⁄₈" (86mm) max.
3