Siefken km713 Instrucciones De Uso página 31

Option 2: to use only with the side handle
Securely attach the side handle to one of three sander / polisher locations by threading it.
7.3 Preparation of workpiece and work area
1. Keep a clean, well-lit work area. Children or pets should not be allowed in the work area to
avoid distractions and injuries.
2. Route the power cord a safe route to reach the work area without creating a tripping hazard or
exposing the power cord to possible damage. The power cord must reach the work area with an
additional length su cient to allow free movement while working
3. Secure loose parts with a vise or clamps (not included) to prevent movement while working
4. There should be no dangerous objects such as utility lines or nearby foreign objects that pre-
sent a danger while working.
8. OPERATION
8.1 Switch on / o
Before activating the ON / OFF switch, verify that the pad is adjusted and functions properly, and
is tight.
8.2 polished
1. Make sure that the surface to be polished has been thoroughly washed and is free of dust, dirt,
oil, grease, etc.
2. Place a clean foam pad (sold separately) rmly on the back pad.
3 YEARS
Insert hex key
to access the Screw.
Installed handle
L I M I T E D WA R R A N T Y
9