Maintenance And Storage - Siefken km713 Instrucciones De Uso

3 YEARS
L I M I T E D WA R R A N T Y

9. MAINTENANCE AND STORAGE

CAUTION To ensure proper machine operation, a quali ed technician must review and adjust the
tool at an authorized service center at least once a year.
Proper maintenance is essential for safe, economical, and trouble-free operation of the machine.
Failure to follow maintenance instructions and safety precautions can cause serious injury or
death. Always follow the procedures, safety precautions, recommended maintenance, and
recommended checks mentioned in this manual.
WARNING: Before carrying out any work on the machine (maintenance, inspection, replacement
of accessories, service) or before storing it. ALWAYS STOP THE ENGINE, wait for all moving parts to
stop, and allow the machine to cool. Prevent the engine from starting accidentally (disconnect
the power supply unit from the mains)
Important Warnings
Always make sure all nuts and bolts are tight and make sure the machine works properly
-Keep the machine in good condition, if it is necessary to change the warning labels and instruc-
tions on the machine
-Always make sure that the ventilation openings are kept free of debris.
-For safety reasons, replace worn or damaged parts. Use only original spare parts and accessories.
Parts not tested and approved by the equipment manufacturer can cause unpredictable
damage
-Repair and maintenance work other than those described in this section, which are more com-
plicated or require special tools, please contact our authorized service.
9.1 Maintenance
CAUTION: Never spray the product with water or expose it to water. In any case, do not wash the
machine parts, which are not designed for it, with water.
Never use aggressive detergents or solvents for cleaning.
1. Carefully clean the machine after each use.
12