Speci C Safety Rules - Siefken km713 Instrucciones De Uso

3 YEARS
L I M I T E D WA R R A N T Y
g. Use the power tool, accessories and tool bits etc. in accordance with these instructions and in
the manner intended for the particular type of power tool, taking into account the working con-
ditions and the work to be performed. Using the power tool for operations other than those
intended could result in a dangerous situation.

5.2 Speci c safety rules

a) Hold the tool by the insulated gripping surface when performing an operation where the cut-
ting tool may contact hidden wiring or its own wire, causing shock to the operator.
b) Do not keep the tool with the blade touching any surface. The action of the blade will push the
tool and cause bodily injury.
c) Allow the tool to come to a complete stop before releasing it. A walking tool will shake if the
tip of the blade touches any surface.
d) Always wear safety glasses or goggles, normal glasses or sunglasses are not safety glasses.
e) Do not cut very large workpieces.
f) Do not cut nails or screws unless you are using a blade speci cally designed for this purpose,
inspect the material before cutting
g) Before starting the tool, make sure that the blade does not touch the workpiece
h) Keep hands away from moving parts and the top surface of the workpiece. Do not put your
hands under the work surface while the saw is running.
i) Check your area to determine the proper distance before cutting. This will prevent cuts on your
work table, oor, etc.
6