NOTE
►
Ideally, clean the appliance directly after cooling, so that milk residues
cannot dry onto it.
For the first, rough cleaning, fill the jug
(the used whisk
marks.
Start the appliance so that the whisk swirls through the water.
Afterwards, rinse the appliance out with plenty of clean water.
■
Disassemble the appliance to clean it thoroughly:
–
–
■
Clean the lid
warm water with a mild detergent. Rinse all the parts thoroughly to remove
any detergent residue. Dry all parts well.
NOTE
■
Wipe the base
gent on the cloth. Afterwards, wipe it with a cloth moistened only with fresh
water to ensure that all detergent is removed. Dry the base well before using
it again.
■
Reassemble the appliance:
–
–
–
Storage
■
Store the cleaned appliance in a clean and dry location.
SMAI 550 A1
is still fitted). Pay attention to the MIN and MAX
remove the spiral coil
Pull the sealing ring
and stirrer
You can also clean the jug
with a damp cloth. For stubborn soiling, use a mild deter-
Push the sealing ring
small sealing lip on the sealing ring
Insert the spiral coil
Place the lid
back onto the jug
with water and a little detergent
from the appliance.
off the lid
.
, sealing ring
, spiral coil
in the dishwasher.
back onto the rim of the lid
is facing outwards.
into the slots of the whisk on the stirrer
.
and jug
in
. Ensure that the
.
GB │ IE
│
29
■