Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
OBJ_BUCH-2978-001.book Page 16 Monday, October 10, 2016 2:00 PM
Cordless Screwdriver
Maximum drilling diameter (1st/2nd gear)
– Wood
– Steel
– Brickwork
Tool holder
Max. screw dia.
Weight according to EPTA-Procedure 01:2014
Permitted ambient temperature
– during charging
**
– during operation
and during storage
Recommended batteries
Recommended chargers
*depending on the battery pack being used
** limited performance at temperatures <0 °C
Noise/Vibration Information
Sound emission values determined according to
EN 60745-2-2.
BS 14,4-A EC Compact
Typically the A-weighted noise levels of the product are:
Sound pressure level 86 dB(A); Sound power level 97 dB(A).
Uncertainty K=3 dB.
Wear hearing protection!
Vibration total values a
(triax vector sum) and uncertainty K
h
determined according to EN 60745-2-2:
2
Drilling into metal: a
<2.5 m/s
h
Screwdriving without impact: a
h
BS 18-A EC Compact
Typically the A-weighted noise levels of the product are:
Sound pressure level 87 dB(A); Sound power level 98 dB(A).
Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a
(triax vector sum) and uncertainty K
h
determined according to EN 60745-2-2:
2
Drilling into metal: a
<2.5 m/s
h
Screwdriving without impact: a
h
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.
The declared vibration emission level represents the main
applications of the tool. However if the tool is used for differ-
ent applications, with different accessories or insertion tools or
is poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
mm
mm
mm
mm
kg
°C
°C
2
, K=1.5 m/s
2
2
<2.5 m/s
, K=1.5 m/s
2
, K=1.5 m/s
2
2
<2.5 m/s
, K=1.5 m/s
BS 14,4-A EC Compact
35
13
–
1.5 – 13
8
*
1.4/1.6
0 ... +45
–20 ... +50
AKKU-LI-CV-14,4V/x,xAh
AL 30-CV-LI
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
EC-Declaration of Conformity
We declare under our sole responsibility that the product
described under "Tool Specifications" complies with all
applicable provisions of the directives 2009/125/EC
(Regulation 1194/2012), 2011/65/EU, 2014/30/EU,
2006/42/EC including their amendments and is in conform-
ity with the following standards: EN 60745-1,
EN 60745-2-2.
Technical file (2006/42/EC) at:
Adolf Würth GmbH & Co. KG, Abt. PPT
Reinhold-Würth-Straße 12–17
74653 Künzelsau
GERMANY
www.wuerth.com
Frank Wolpert
Dr.-Ing. Siegfried Beichter
General Manager
General Manager
Künzelsau: 10.10.2016
BS 18-A EC Compact
38
13
–
1.5 – 13
10
*
1.5/1.7
0 ... +45
–20 ... +50
AKKU-LI-CV-18V/x,xAh
AL 30-CV-LI
16
Publicidad
Tabla de contenido
