Taurus ALPATEC AP2050 Manual De Uso página 9

- Do not cover or obstruct any of the openings of
the appliance.
- The plug must be easily accessible so it can be
disconnected in an emergency.
INSTRUCTIONS FOR USE
BEFORE USE:
- Remove the appliance's protective film.
- Make sure that all the product's packaging has
been removed.
- To eliminate the smell given off by the applian-
ce when used for the first time, it is recommen-
ded to have it on at full power for 2 hours in a
well-ventilated room.
- Prepare the appliance according to the function
you wish to use:
WIFI CONNECTION & DOWNOADING THE
APP:
- To be able to use the thermal transmitter High
Landscapes Connect from anywhere, the Tau-
rus Connect App has to be downoalded.
SET UP:
- Download the Taurus Connect App form the
App Store or Google Play.
- Sign up using your email address and pass-
word.
- Confirm the registration using the verification
code that will be sent to your email account.
- Create your home, name it, establish the geo-
graphical location and select the room where
you are going to place this smart appliance.
- Add High landscapes Connect by following the
steps described in THE QUICK GUIDE.
IMPORTANT
- The device only supports 2.4GHz Wi-Fi net-
work.
- If the connection fails again, check the follo-
wing possible causes
- High Landscapes Connect is too far away from
the router.
- The Wi-Fi password is incorrect.
- The Wi-Fi network is not 2.4GHz
INSTALLING THE PRODUCT
- Pull the rear cover handle to remove it (FIG1)
- Remove the plastic package from the filter.
(FIG2)
- Install the filter into the machine (FIG3)
- Fasten up the rear cover and connect to the
power source (FIG4)
USE:
- The appliance can be used directly connected
to the main.
- Extend the cable completely before plugging
it in.
- Attach the appliance to its base / connector
making sure that it is correctly fitted into place.
- Connect the appliance to the mains.
- Guide the appliance to direct the flow of air in
the desired direction.
- Turn the appliance on, by using the on/off
button.
- Select the appliance function desired.
- Select the desired speed.
TIMER FUNCTION:
- The appliance's operating time can be control-
led through the app.
FAN SPEED MODE
Cycles through fan speeds:
AUTO MODE
- Auto Mode uses the sensor inside the air puri-
fier to adjust the fan speed automatically based
on air quality.
- For example, if the air quality is bad, the fan will
automatically be set to highspeed.
SLEEP BUTTON
- Tap this button (1), to turn Sleep Mode on/off.
- Sleep Mode operates quietly by using the
lowest possible fan speed, all indicators except
sleep indicator will be off.
- Tapping any key, the display will resume for
30 seconds, and then tap sleep button or fan
button within 30 seconds to exit sleep mode
and enter the auto mode.
- After 30 seconds without button operation, the
display will be off.
LOCK/UV-C BUTTON
- The UV-C button is combined with child lock
button.
- Tap this button to turn the UV-C on/off. When