Program Mode - Mad Catz C.A.T. 7 Manual De Instrucciones

CONFIGURING THE REMAPPABLE BUTTONS
The 6 extended programmable bu�ons (K1, K2, K3, K4, K5, K6) can set the remappable
func�on. It can store up to 2 memory profiles on board at the same �me.
Profile 1
PROG
1. Press PROG bu�on to enter program mode, use the up and down bu�on on the
D-PAD to select Profile 1 or Profile 2 for edit.
2. Press SET bu�on to enter se�ng mode, the screen shows "program mode"
3. While press and hold the extended bu�on, you can configure:
K5
K6 ON
OFF X D
4. Press the SET bu�on to end configura�on and back to the normal "GAMEPAD" state.

Program mode

SET
K3 set to X
K3
K4
K3 disabled
Program mode
Press any of the basic bu�ons
to assign its func�on to the
extended bu�ons, then set up
will be completed a�er you
release the bu�ons.
OR
Press the SET bu�on to disable
the se�ng of this extended
bu�ons ; the display shows
and back to "Program mode".
GAMEPAD
07