Cleaning Your Floors - Bissell PROHEAT PET TURBO 1799V Manual Del Usuario

Cleaning Your Floors

1.
Set the ReadyTools™ Dial to
Floor Cleaning.
3.
Plug the power cord into a
properly grounded outlet.
Press the Power Switch to turn
the machine ON.
ATTENTION
• To prevent damage to Berber carpets, avoid repeated strokes in the same area.
• Do not overwet carpet. Be careful not to run over loose objects or edges of area rugs. Stalling the brush may result in premature
belt failure.
WARNING
and level.
6 BISSELL.com
2.
Choose a SmartMix® Setting. Each setting is designed to
adjust proper amounts of water and cleaning formula for your
carpet.
Heavy Traffic: For your dirtiest carpeted areas.
Normal: For lightly soiled carpet.
Water Rinse: Will not put cleaning formula on carpet.
4.
While pressing the trigger,
make one slow pass forward
and back to put water and
formula down.
To reduce the risk of injury, be extra careful when cleaning stairs. Make sure the machine is secure
5.
Release the trigger and
make one slow pass forward
and back over the same area
to pick up the water and
formula that was just put
down. Repeat cleaning passes
until the liquid coming up
appears clean. Continue passes
without pressing the trigger
until you can't see any more
water being pulled up.