Emptying The 2-In-1 Tank; After-Cleaning Care - Bissell PROHEAT PET TURBO 1799V Manual Del Usuario

Emptying the 2-in-1 Tank

1.
Press the Power Switch OFF.
Remove the 2-in-1 Tank from the
base by lifting up on the tank's
carry handle.

After-Cleaning Care

1.
Turn power OFF and unplug
the machine. Always wrap the
power cord and make sure the
hose is securely wrapped.
4.
Clean the flow indicator
filter after each use. Unscrew
the cap to lift the red rotor and
white filter. Rinse all parts with
water and return them to the
machine. Twist the cap back
on, but do not overtighten.
WARNING
electrical outlet before performing maintenance or troubleshooting.
2.
Rotate the carry handle to
unlatch the lid and empty the
tank.
2.
Make sure you rinse the
2-in-1 Tank an extra time on
the last rinse. Rinse under and
around the bladder.
5.
Insert the Nozzle Clean Out
Tool into the thin slot on the
end of the Floor Nozzle. Clean
until free of pet hair or debris.
Use the opposite side of the
tool to clean the Brush Rolls
by combing the bristles to help
loosen hair or debris.
To reduce the risk of fi re, electric shock, or injury, turn power OFF and disconnect plug from
3.
Remove and rinse the red
lint screen.
6.
Wipe the machine's exterior
with a soft cloth. Once your
carpet is dry, vacuum again to
remove any excess hair or fuzz
on your carpet.
BISSELL.com 9