Cleaning With The Hose & Attachments - Bissell PROHEAT PET TURBO 1799V Manual Del Usuario

Cleaning with the Hose & Attachments
1.
Set the ReadyTools™ Dial
to the Tools setting. This will
allow the machine to divert the
spray and suction to the hose.
4.
Plug the power cord into a
properly grounded outlet.
Press the Power Switch to turn
the machine ON.
ATTENTION
• Check upholstery tags for any special care instructions. If possible, check for colored stuffing as it is possible the color could bleed
through. Check for colorfastness in a hidden area, like the back or underside of the furniture.
• Do not overwet carpet.
WARNING
and level.
8 BISSELL.com
2.
Set the SmartMix® Dial to
the Normal setting.
5.
Press the trigger to spray solution on the area you are
cleaning. Slowly move the tool back and forth over the soiled
surface. Release the trigger to suction up the soiled area. Work
in small sections.
When finished, rinse the hose and tool by suctioning warm water
from a bowl. Allow the hose and tool to dry and re-wrap the
hose & tool on the machine before storing.
To reduce the risk of injury, be extra careful when cleaning stairs. Make sure the machine is secure
3.
Attach the cleaning tool to
the end of the hose.