Technical Specifications; Safety Rules - Krups BeerTender 0828213 Manual Del Usuario

2 Technical specifications

Rated voltage:
Rated power:
Power supply:
Insulation class:
Cooling class:
Casing material:
Size (w x h x d) (mm) 300 x 452 x 494
Weight:
Cord length:
Beer container:
Control panel:
Operating conditions With 80%RH
The manufacturer reserves the right to make
constructive and engineering changes as warranted by
technological advances.
Appliance complying with European Directive
89/336/EEC (Legislative Decree 476 of 04/12/92)
concerning electromagnetic compatibility.
3

Safety rules

Never place powered components in contact with water.
There is a danger that this may cause a short circuit.
Intended use
This appliance has been manufactured exclusively for
dispensing beer in a domestic setting.
Only original BeerTender Kegs mentioning "Compatible
BeerTender" can be used with the appliance; you should
not use any other commercially available beer containers.
Before using a keg, check the "best before end" date
shown at the bottom of the keg. Do not insert or use
BeerTender Kegs after the date shown.
You should not use the appliance for purposes or with
containers other than those specified above.
You should not introduce any materials other than
BeerTender Kegs inside the appliance.
5
220-240 V
61W
50Hz
II
N
Thermoplastic
(419 without drip tray)
6,1 Kg (5,6 Kg without drip tray)
1.4 m
BeerTender Keg
Top
min 12°C, max 30°C