Cautionary Notes; Using The Beertender System - Krups BeerTender 0828213 Manual Del Usuario

14
15
13
Machine Components
BeerTender
1. BeerTender dispensing system
2. Refrigerating chamber
3. Lid
4. Lid opening handle
5. LCD control panel
5.a Reset button
5.b Temperature programming button
6. Tap cover
7. Dispensing spout
8. Beer tap handle
9. Drip grate
10. Drip tray
11. Main switch
12. Power cord with plug
BeerTender Keg
13. BeerTender Keg
14. Beer tube
15. BeerTender Keg tap
4

Cautionary Notes

Using the BeerTender system

To obtain draft beer of optimal quality you should keep
two basic factors in mind, the temperature of the beer
and hygienic conditions.
1. Pre-chill the beer keg to prevent excess foam.
Always use a chilled keg. If you fail to chill the keg
sufficiently too much foam will be produced when
you start to pour your beer.
2. Always clean the appliance after use. Beer is a
natural product that can spoil. Therefore, you should
always keep the appliance clean to maintain the
quality of the beer dispensed and avoid unpleasant
odours (see "Cleaning"). The dispensing spout
should be cleaned before a new keg is installed and
the drip tray and grate should be emptied after
every use.
You should also follow these other rules when using the
BeerTender system:
8