12 Troubleshooting - Krups BeerTender 0828213 Manual Del Usuario

This marking indicates that this product should not
be disposed with other household wastes throughout
the EU. To prevent possible harm to the environment or
human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material
resources. To return your used device, please use the return
and collection systems or contact the retailer where the
product was purchased. They can take this product for
environmental safe recycling.
· Appliances that are no longer used should be
rendered unusable.
· Unplug the appliance and cut the power cable.
· Appliances no longer in use must be taken to a
suitable waste collection facility so that the special
components contained in the appliance may be duly
disposed of.
· The "TEM - Module" (or Peltier's cell) must be
disposed of in accordance with the regulations
currently in force in the user's country.

12 Troubleshooting

Problem
The appliance The appliance is
does not turn not connected to
on. the mains power
supply.
You can not fit The BeerTender
the BeerTender Keg tap has been
Keg tap in the activated by hand.
tapping unit.
You can not The BeerTender
close the tap Keg tap is not
cover. inserted correctly.
No beer is being The BeerTender
dispensed. Keg is empty (last
level of volume
indicator is
blinking).
20
Possible causes Remedies
Connect the
appliance to the
power supply.
Put the BeerTender
Keg tap back in its
original position.
Remove the
BeerTender Keg tap
from the appliance
and fit it again
following chapter
6 – Using the
BeerTender.
Replace the
BeerTender Keg
with a new one.