BGS technic 9859 Guia De Inicio Rapido página 2

Tool Set for BMW E70, E82, E90, E91, E92, E93
TOOLS
1 Open End Spanner 50 mm,
to be used as OEM 33 5 040
BMW E70, E88, E90, E91, E92
2 Flange Holding Tool,
to be used as OEM 23 0 020
BMW E70, E82, E88, E90, E91, E92, etc.
3 Multi-Point Ring Spanner 65 mm,
to be used as OEM 33 5 050
BMW E70, E82, E90, E91, E92, E93
4 Multi-Point Socket 34T,
to be used as OEM 3 35 060
BMW E70, E82, E90, E91, E92, E93
5 Seal Ring Drift, to be used as OEM 3 35 080
BMW Differential: HAG 215 Sp, HAG 220kom,
INTENDED USE
This special tool is used for removing and installing of drive shaft nut when replacing the rear
differential pinon seal on BMW E70 / E82 / E90 / E91 / E92 / E93 rear and four wheel drive.
SAFETY ADVICE
•
Do not use the tool for other purpose for which it is intended.
•
Check the tool for damage before using, do not use the tool if it is damaged.
•
Keep children and other persons away from work area.
•
Never allow children to play with the tool or its packaging.
•
When using this tool pay attention to a safe stand.
INSTRUCTION
Drive shaft flange (A)
Extension (B)
Drive Shaft Assembly Tool (1), for loosening
and tightening the inlay nut for bolting the
propeller shaft to the final drive.
Flange Holding Tool (2), for gripping three-
hole flange when releasing it from bevel
pinion.
Multi-Point Ring Spanner (3), for loosening
and tightening the flange nut on the final
drive.
Socket Nut (4), for counter-holding the
transmission input shaft when loosening and
tightening the flange nut.
Drift (5), for fitting the input shaft sealing ring.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Differential Flange & Insert Nuts
HAG 225kom, HAG type G
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
4
5
1
A
1
2
5
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
BGS 9859
2
3
B
3
4