WAGNER FineSpray Manual De Instrucciones página 7

FineSpray
Assembly
For assembly, insert the spray attachment into the gun handle so that the two
arrows point at each other. Turn the gun handle 90° in the arrow direction until
it audibly engages. (Fig. 1)
To remove the spray attachment, push the catch (Fig. 1, A) beneath the trigger down and
turn the spray attachment by 90°.
For further information on setting the spray pattern and the correct spraying
technique refer to the instructions of the basic device.
Spare Parts (Fig. 2)
You cannot combine different-coloured parts of other attachments.
Pos. order no.
1 2321 877
2 2321 868
3 2314 591
4 2317 820
5 2314 585
6 2317 667
7 2323 934
8 2304 027
9 0417 308
10 2324 250
11 2319 223
12 2319 222
13 2324 248
14 2322 451
2315 539
designation
FineSpray spray attachment (brown) complete
Spray jet width adjusting lever (shaping air)
Spray jet level adjusting ring (vertical/horizontal)
Air cap
Air screen
Nozzle (R 1.8)
Nozzle seal
Non-return valve (Ventilating hose, valve cover, diaphragm)
O-ring of spray attachment
Body of gun (including position 8)
Container seal
Feed tube
Fine feed tube filter (red, 5 pc.)
Container with cover 1000 ml
Lubricating grease
GB
5