Philips HP6383 Manual De Usuario página 10

EnglisH
10
cleaning the precision trimming head and combs (HP6383/
HP6382 only)
1 Make sure the appliance is switched off.
2 Detach any comb and/or attachment from the appliance.
3 Blow and/or shake out hair that has accumulated at the precision
trimming head and/or combs.
4 Clean the trimming head and the combs under the tap.
Note: You can also use the cleaning brush to clean the precision trimming head
and the combs.
5 Let all parts dry completely before you use the appliance again.
Store the appliance in a dry place.
cleaning the shaving head (HP6383/HP6382 only)
Note: The shaving foil is very delicate. Handle it carefully. Replace the shaving
foil if it is damaged.
1 Make sure the appliance is switched off.
2 Detach the shaving head from the appliance.
3 To detach the shaving foil unit from the shaving head, press the two
release buttons with one hand and remove the shaving foil unit with
the other hand.
4 Clean the cutter and the inside of the shaving foil unit carefully with
the cleaning brush and under the tap.
Note: Do not use a towel to dry the shaving head, to avoid damage.
5 Let the shaving head air-dry completely before you assemble and
store it.