Changing The Super Administrator Login; Logging Into The B064-Series Kvm Switches; Local Console Login; Browser Login - Tripp-Lite NetDirector B064-008-01-IPG Manual De Instrucciones

2. Super Administrator Setup

2.4 Changing the Super Administrator Login

To change the default Super Administrator Username and Password,
do the following:
1. At the top of the Web page, click User Management.
Since this is the first time the page is being accessed, only the
Super Administrator appears:
3. Logging Into the B064-Series KVM Switch
The B064-Series KVM Switches can be accessed in the following ways: via local console, an Internet browser, the AP Windows Client and/or
the AP Java Client. Operating the KVM switch and configuring its settings is done the same regardless of how you connect to the B064-Series
KVM Switch; the only difference is the way in which you establish the connection. This chapter describes the login procedures for each of
these methods.

3.1 Local Console Login

The local console login dialog box is displayed once the installation is complete. Simply key in your Username and Password and click Login to
bring up the OSD Main Page.
Note: If you supply an invalid login, the authentication routine will return an Invalid Username or Password message. If you see this message, log in again
being careful to enter the correct Username and Password.

3.2 Browser Login

The B064-Series KVM Switches can be accessed via Internet browser from any platform that has the Java Runtime Environment 6, Update 3,
or higher installed. If you don't already have the required JRE installed, it is available for free download from the Java web site: www.java.com
Note: Windows 7 users must run Internet Explorer as an administrator for the Active X control to work properly. If you don't run Internet Explorer as an
administrator, you will not be able to access the connected computers.
To access the switch via browser, do the following:
1. Open the browser and specify the IP address of the B064-Series KVM Switch you want to access, as given to you by your system
administrator.
Note: For security purposes, a login string may have been set by the administrator. If so, you must include a forward slash and the login string along with the
IP address when you log in. (For example, a computer with a login string of B064-032-04-IPG would have a URL such as 192.168.0.100/B064-032-04-IPG)
2. When you try to log into the device from your browser, a Security Alert message appears to inform you that the device's certificate is not
trusted, and asks if you want to proceed. The certificate can be trusted, but the alert is triggered because the certificate's name is not
found on Microsoft's list of Trusted Authorities.
2. Click Administrator in the left panel; or, select Administrator in the
central panel and click the Modify button at the bottom of the
page.
The User Information page appears:
3. Change the Username and Password to something unique.
4. Re-enter the password to confirm it is correct.
5. Click Save.
6. When the dialog box informing you that the change completed
successfully appears, click OK.
6