In The Event Of A Problem - Krups Aquacontrol FLF1 Manual De Instrucciones

Ocultar thumbs Ver también para Aquacontrol FLF1:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 14
• The kettle stops automatically as soon as the
water boils. (7)
• You can also switch the kettle off at any
time during the heating process by pressing
the "0" switch. (8)
• To pour, press the thumb-release latch under
the handle. (9)
• Empty the water from your kettle
completely after each use.
Cleaning
To clean your kettle:
• Unplug it or remove it from its base.
• Leave it to cool, and then clean it with a
damp sponge.
To clean the filter (depends on the
model):
• Clean the filter regularly. Rinse it in clean
running water and using a soft, non-metallic
brush if needed.
De-scaling
• Descale your kettle regularly.
• Use:
1) a descaler specifically intended for PLASTIC
kettles. Follow the manufacturer's instruc-
tions closely.
2) or white vinegar.
Pour 1/2 l of vinegar into the kettle. Leave it
to work for one hour without heating.
3) or citric acid. Boil 0.5 l of water. Add 25 g
of citric acid. Leave it to work for 15
minutes.
• Repeat if necessary.
• If you are using citric acid, always dilute it
with water.
• Whatever method you use, always
empty your kettle and rinse it 5 or 6
times.
• Before using again, rinse with cold water
then boil (max level) and discard the water
twice without drinking it.
8
Sans titre-4

In the event of a problem

• Check:
. the connection.
. that the kettle is correctly positioned on its
base.
. that the switch is in the "on" position by
pressing "I".
. that the lid is locked in the "lock" position
and that the protective cover is blocking off
the spout
. that the kettle has not been used without
water. In this case:
take the kettle off its base, fill the appliance
with cold water, then try again.
• If your appliance only works intermittently or
stops before reaching boiling point it may be
due to a build up of scale please refer to De-
scaling.
If your appliance is still not working,
contact a KRUPS approved service centre (see
list in the "KRUPS Service" booklet).
Prevention of domestic
accidents
• Unplug the appliance when you are not
using it and when you clean it.
• Take care if carrying the kettle when it
contains hot water.
• Tilt and pour slowly in order to prevent any
risk of burning with hot water.
• Keep your hands away from the pouring
spout when the water is coming to the boil,
and avoid any contact with the hot surfaces
of the appliance.
Your appliance contains valuable materials which can
be recovered or recycled.
Leave it at a collection point.
8
Environment protection first !
7/12/06, 13:38

Publicidad

Tabla de contenido
loading

Tabla de contenido