Auto Power-Off Function - VOX Amplification VX50 AG Manual De Usuario

1.
Turn the MASTER knob on the amp to the minimum position.
2.
Connect the included AC adapter and power cord.
3.
Connect the DC plug of the AC adapter to the DC 19V jack
on the rear panel of the amp, and then connect the plug of the
power cord to an AC outlet.
4.
Secure the cord with the cord hook on the amp to prevent the
DC plug from being disconnected.
5.
If a guitar will be used, connect the cable from the guitar to the
INSTRUMENT jack.
If a microphone will be used, connect it to the MIC jack. If a con-
denser microphone that requires phantom power will be used,
set the PHANTOM switch to ON.
If an audio player will be used, connect it to the AUX IN jack.
6.
Hold down the button until the power indicator lights up
and the amp turns on.
7.
Slowly raise the MASTER knob to adjust the overall volume.

Auto power-off function

The amp has an auto power-off function. With this function, the
amp automatically turns off if there is no operation or input for ap-
proximately 4 hours. When the amp turns off, operating a knob or
switch does not turn it back on. After the amp is turns off, turn it
on again.
The auto power-off function cannot be disabled.
When there is input only to the AUX IN jack, when the input level
to the INSTRUMENT jack or MIC jack is extremely low or chang-
es insignificantly, or when you turn down the INSTRUMENT
VOLUME knob or the MIC VOLUME knob the auto power-off
function may be activated.
Depending on the settings and environment, the amp may inter-
pret noise as input, even if there is no performance, and the auto
power-off function may not be activated.
Setup
Specifications
Input/output jacks:
INSTRUMENT: 1/4" phone jack (unbalanced)
MIC: XLR jack (balanced)
AUX IN: 1/8" stereo mini phone jack
LINE OUT: 1/4" phone jack (unbalanced)
(Headphones): 1/8" stereo mini phone jack
Phantom power:
+15 V
Valve:
Nutube 6P1
Effects:
INSTRUMENT channel
CHORUS, REVERB, CHORUS+REVERB
MIC channel
REVERB
Equalizer:
INSTRUMENT channel
BASS: ±10dB@100Hz
MIDDLE: ±12dB@700Hz
TREBLE: ±10dB@10kHz
MIC channel
BASS: ±10dB@170Hz
TREBLE: ±10dB@7kHz
Output power:
Maximum approx. 50W RMS
Speaker:
VOX Original 8" speaker with tweeter (2-way coaxial)
Power supply:
AC adapter (DC 19V
Current consumption:
3.42A
Dimensions (W x D x H):
354 mm × 208mm × 313mm / 13.94"× 8.19" × 12.32"
Weight:
4.1 kg / 9.04 lbs.
Included items:
AC adapter (DC 19V
* Specifications and appearance are subject to change with-
out notice for improvement.
8
)
), power cord, Owner's Manual