Operation - Tripp-Lite B043-DUA8-SL Manual Del Propietário

System Installation
8
Connect up to two USB 2.0 devices to the USB hub ports on the front panels of the first- and
second-level KVM switches.
Note: Connected USB 2.0 devices can only be accessed by computers that are directly
connected to the corresponding KVM switch. For example, a computer connected to a KVM
switch with BANK 01 will not be able to access the USB 2.0 devices connected to the KVM
switch with BANK 00.
9
Connect the included power supplies to the DC power jacks on the back of the first- and
second-level KVM switches, then plug them into a Tripp Lite Surge Protector, Power Distribution
Unit (PDU), Uninterruptible Power Supply (UPS), or wall-outlet.
10
Power on all connected devices.

Operation

Pushbutton Commands
To access and switch between connected computers via pushbutton commands, simply press the
desired front-panel pushbutton to toggle the focus of the KVM, audio and USB hub ports to the
desired computer.
Keyboard Hotkey Commands
Another way to switch between connected computers is to use keyboard hotkey commands. Besides
allowing you to switch computers, hotkey commands enable you to perform other functions, such
as binding/unbinding computer switching with the USB hub ports, initiate an auto scan, and more.
The table below lists the available hotkey commands and their functions. Hotkey commands are
performed by pressing each key in the sequence in succession.
Command
Select Computer
(In a single KVM
installation)
Select Computer
(In a cascaded KVM
installation)
Define Hotkey
Preceding Sequence
Unbind KVM and
USB Hub
Functionality
18-09-501-9338C1.indb 6
Hotkey Sequence
[Scroll Lock] [Scroll Lock] [yz]
yz = 2-digit port number
(e.g. 01, 02, etc.)
[Scroll Lock] [Scroll Lock] [ab] [yz]
ab = 2-digit BANK number
yz = 2-digit port number
[Scroll Lock] [Scroll Lock] [H] [x]
x = [F12], [Num Lock], [Caps
Lock], or [Scroll Lock]
[Scroll Lock] [Scroll Lock] [X]
Description
Switches focus of the KVM, Audio,
and USB Hub ports to the selected
computer. For example, a command
of [Scroll Lock] [Scroll Lock] [05] will
switch to port 5 of the KVM switch.
Switches focus of the KVM, Audio,
and USB Hub ports to the selected
KVM switch and computer. For
example, a command of [Scroll Lock]
[Scroll Lock] [01] [04] will switch to
port 4 of the BANK 01 KVM switch.
Changes the hotkey preceding
sequence to [F12], [Num Lock],
[Caps Lock], or [Scroll Lock].
Unbinds the KVM and USB Hub
functionality. Once unbinded,
switching computers will only transfer
the KVM and Audio functionality. The
USB Hub functionality will remain on
the computer port it was on when it
was unbinded. The KVM and USB Hub
functionality are binded together by
default.
6
11/2/2018 3:01:49 PM