Rackmount Installation; System Installation; Standalone Installation - Tripp-Lite B043-DUA8-SL Manual Del Propietário

Rackmount Installation

Attach the included rackmount brackets to the KVM switch. Using user-supplied screws, fasten the
rackmount brackets to the rack.

System Installation

Standalone Installation

Note: Before making any connections, turn off the power to the KVM switch and all devices that are
being connected.
1
Connect your monitor to the DVI-I Female console port on the back panel of the KVM switch.
Note: A VGA monitor can be connected using a DVI to VGA adapter, such as Tripp Lite's P556-
Series adapter cables. Computers that support analog audio through the VGA or DVI-I ports
must be connected to the KVM switch in order for video to be displayed on a VGA monitor.
2
Connect your USB keyboard and mouse to the corresponding USB console port on the back
panel of the KVM switch.
3
Connect your speakers and/or microphone to the corresponding 3.5 mm audio console ports on
the back panel of the KVM switch.
4
Using a P759-Series DVI-D/USB/Audio KVM Cable Kit, connect a computer to any of the 8
available computer ports on the back panel of the KVM unit. Note: A VGA computer can be
connected using an individual DVI to VGA adapter (such as Tripp Lite's P556-Series adapter
cables), USB A/B device cable, and 3.5 mm audio cables. Video from a VGA computer will only
display if a VGA monitor is connected.
5
Repeat step 4 for each additional computer you are connecting.
6
Connect up to two USB 2.0 devices to the USB hub ports on the front panel of the KVM switch.
7
Connect the included power supply to the DC power jack on the back of the KVM switch, then
plug it into a Tripp Lite Surge Protector, Power Distribution Unit (PDU), Uninterruptible Power
Supply (UPS), or wall-outlet.
8
Power on all connected devices.
Cascaded Installation
Note: Before making any connections, turn off the power to the KVM switch and all devices that are
being connected.
1
Connect your monitor to the DVI-I Female console port on the back panel of the first-level KVM
switch.
2
Connect your USB keyboard and mouse to the corresponding USB console port on the back
panel of the first-level KVM switch.
3
Connect your speakers and/or microphone to the corresponding 3.5 mm audio console ports on
the back panel of the first-level KVM switch.
4
Using a P759-Series DVI-D/USB/Audio KVM Cable Kit, connect the console ports of the second-
level KVM switch to any of the 8 available computer ports on the back panel of the first-level
KVM unit.
5
Repeat step 4 for each additional KVM you are cascading.
Note: Only 1 additional level of KVM switches can be cascaded for a maximum of 64 ports.
6
Connect a computer to any of the first- or second-level KVM switches' available computer ports
using a P759-Series DVI-D/USB/Audio KVM Cable Kit.
7
Repeat step 6 for each additional computer you are connecting.
18-09-501-9338C1.indb 5
5
11/2/2018 3:01:49 PM