Tripp-Lite B127E-1A1-HH Manual Del Propietário página 5

Standard Extender Kit Installation
Notes:
1) Test to ensure the entire installation works properly before pulling cables through
ceilings/walls.
2) To achieve maximum distance and performance, use 24 AWG solid-wire Cat6
cable. Using stranded-wire Cat6 cable, or cable with a gauge (AWG) size higher
than 24 AWG, will result in shorter extension distance. Higher gauge cabling,
such as 26 AWG, has a more limited transmission capability than lower gauge
cabling. All Tripp Lite N202-Series Cat6 cables are made with 24 AWG solid-wire
cabling.
3) The installation diagram shows a B127E-1A1-HH unit.
4) External power is not required for remote receiver units due to Power-over-Cable
(PoC) technology incorporated in the transmitter units.
B127E-1A1-HH
Extender Kit
PC WITH PC WITH
USB RS-232
CONTROL CONTROL
MONITOR
LOCAL
TRANSMITTER
1
Up to 328 ft. (100 m) Cat6 cable at 4K/60 Hz
2
Up to 15 ft. (4.5 m) HDMI 2.0 cable at 4K/60 Hz
3
RS-232 Male to Male Cable
4
Micro USB Cable
USB
MOUSE
IR SENSOR
IR Control
USB
Pad
KEYBOARD
Up to 328 ft. (100 m) at 4K/60 Hz
HDR PLAYER
5
RS-232 SCANNER/
OPTIONAL
IR SENSOR
IR Control
Pad
REMOTE
RECEIVER