9.
Maintenance
The maintenance intervals are valid for operation of the
supplementary equipment set in automotive service workshops
for 8 working hours per day. For longer service hours the intervals
will be shortened accordingly.
1
2
Figure 7: Test oil and intake filter
Test oil filter (1) to be changed / replaced:
– after testing of 200 pumps, at latest however every 2 months.
– during main inspection, or where required
Intake filter (2) is to be cleaned or replaced:
– after testing of 200 pumps, at latest however every 2 months.
– during main inspection, or where required
10.
Environmental protection
10.1
General
Oils are water polluting fluids and they must be disposed of in
accordance with local waste-disposal regulations.
10.2
Waste disposal
The test oil filter or intake filter is special waste and must be
disposed of accordingly.
i See too the chapter on Environmental protection in the
operating instructions for the EPS 807/815 injection pump
test bench.
13