Tripp-Lite TLNETCARD El Manual Del Propietario página 2

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Features
The TLNETCARD allows users to operate any compatible Tripp Lite UPS
System as a managed device on the network, accessible via Web browser,
Network Management Station or telnet/SSH.
Network Port: Connects to the Ethernet Network.
A
B
LED Indicators: When the TLNETCARD is initializing or upgrading
firmware, the two LED indicators simultaneously flash to show its status.
• Rapid simultaneous flashing (every 50ms): Initialization or firmware
upgrade in progress.
• Slow simultaneous flashing (every 500ms): Initialization failed.
WARNING: Do NOT remove the TLNETCARD or disconnect the UPS
system's input power during initialization or firmware upgrade!
This could result in data loss or damage to the TLNETCARD.
The green (left) LED indicator shows the network connection status:
• ON: Network connection established and the IPv4 address is
useable.
• OFF: Not connected to a network.
• Flashes slowly (every 500ms): Faulty IP address.
The yellow (right) LED indicator shows the linking status between the
TLNETCARD and the UPS:
• Flashes rapidly (every 50ms): UPS linked.
• Flashes slowly (every 500ms): UPS not linked.
16-01-412-933525.indb 2
A
C
A
B
2
D
E
1/28/2016 3:02:05 PM

Publicidad

Tabla de contenido
loading

Tabla de contenido