Tripp-Lite TLNETCARD El Manual Del Propietario página 4

Preparation
1
Confirm Package Contents: In addition to this manual, your package
should include the accessory card in an anti-static bag, a configuration
cable (7315E1) and several faceplates. If anything is missing, contact
your supplier immediately.
2
Install UPS: Install your UPS system and turn it on before installing
the TLNETCARD. Ensure the accessory card slot is accessible.
3
Locate MAC Address: The 12-digit MAC address (000667xxxxxx) is
printed in two locations: a label attached to the underside of the card
and a duplicate label inside the box. Attach the duplicate label to the
UPS system or keep it in a secure location for easy reference.
4
Download TLNET Configurator: TLNET Configurator is a utility that
simplifies configuration and firmware update of one or more
TLNETCARDs. Its Discover function identifies the IP Addresses
assigned to the TLNETCARDs. The utility can be found at
tripplite.com/support and typing TLNETCARD in the search field.
Note for Network Management System Users Only: Two MIB files -
Tripplite.mib and RFC1628.mib - must be loaded on each Network Management
Station that will monitor the UPS system via SNMP . The files can be found by
going to tripplite.com/support and typing TLNETCARD in the search field.
16-01-412-933525.indb 4
WARNING: When handling the TLNETCARD, follow
standard ESD (electrostatic discharge) precautions to
avoid damaging the card. For your safety, you should also
read the documentation that came with your UPS system
to familiarize yourself with precautions against electric
shock.
4
1/28/2016 3:02:05 PM