Dell K792N Inicio De Su Sistema página 12

Installing the Rails
NOTE:
The instructions are the same for square-hole racks and unthreaded, round-hole racks. The rails fit both
rack styles. The square-hole rack is shown in the illustrations.
Select the proper holes in the rail for positioning the UPS in the desired location in the rack.
4
The rails should be located at the bottom of the 2U (or 3U for 2700/2300W UPS models) space
allocated for the UPS or EBM.
Position the end of the left and right rails labeled FRONT facing inward.
5
8
|
Getting Started With Your System