Starting the UPS
Press the
button on the UPS front panel.
8
Completing the Startup
Verify that the Normal icon
9
UPS is operating normally and any loads are powered.
On the UPS status summary screen, press the
10
Resolve any active alarms before continuing. See "Troubleshooting" in the Dell Online Rack UPS
2700W User's Guide.
If there are no active alarms, a "No Active Alarms" message appears.
To change other factory-set defaults, see "Operation" in the Dell Online Rack UPS 2700W User's
11
Guide.
16
Installation and Startup
appears on the UPS status summary screen, indicating that the
button to check for active alarms or notices.