Philips Senseo HD7825/82 Manual De Instrucciones página 4

Wait until the light around the ON/OFF
button is continuously lighted.
9.
Start the second descaling cycle by pressing
the 1- and the 2-cup button briefly at the
same time.
Wait until the water reservoir is empty and
the second cycle is finished.
After the descaling cycle with the descaling mixture, proceed 2 times the rinsing cycle with fresh
water. Do not switch off the appliance in between these two different cycles!
Rinsing cycle; 2 cycles with fresh water.
Action
10.
Fill the water reservoir up to the
MAX indication with fresh cold
water.
11.
Place the water reservoir back
onto the coffee machine and put
a bowl with a capacity of min.
1500ml under the spout.
Wait until the light around the
ON/OFF button is continuously
lighted.
12.
Start the first rinsing cycle by
The CALC light and the ON/OFF light
will start to flash slowly.
When the second cycle is finished the
light ring around the ON/OFF button
starts to flash rapidly.
The CALC light continues to blink
slowly to indicate the descaling
procedure is still activated.
Feedback indicator lights
When you take off the water reservoir from
the machine the ON/OFF light will blink fast.
The CACL light will continue to blink slowly.
The light around the ON/OFF button and the
CACL light will blink slowly.
The CALC light and the ON/OFF light will start