Connecting To Wi-Fi - Honeywell Home VisionPRO 8000 Smart Manual Del Usuario

Connecting to Wi-Fi

1 Connect to the Wi-Fi network.
1.1 Touch MENU
1.2 Select Wi-Fi Setup.
The thermostat will scan for available Wi-Fi
networks.
1.3 The screen displays "Finding Networks
Please Wait" after which it displays a list of
all Wi-Fi networks it can find.
1.4 Find the name of the network you want
to use by pressing the arrow buttons to
scroll up/down or left/right. Press the Wi-Fi
network name, then press Select.
NOTE: If the Wi-Fi network name is hidden,
see "Connecting to a hidden Wi-Fi network"
on page 20.
1.5 When prompted, press the screen to edit the
password (if necessary).
1.6 Enter the password.
Press the s or t buttons to change the
letter or number.
Press the
character, or the
previous character.
Use the s or t buttons at the bottom to
change letter case.
Press Done when complete.
1.7 The screen will let you know when the
connection is successful. Press Done when
the connection is successful.
If the connection is not successful,
the screen will explain why not. See
"Unsuccessful connection" on page 19.
Follow instructions on the screen to try
again.
NOTE: Press the t for more information
about an unsuccessful connection.
1.8 If you want remote access to the thermostat,
you must set up an account at
mytotalconnectcomfort.com and add the
thermostat to the account.
NOTE: You will need the thermostat MAC
and CRC IDs to add the thermostat. They are
on the screen under Menu, Wi-Fi Setup and
on the Thermostat ID Card packed with the
thermostat.
To register your thermostat, follow the instructions
beginning on page 3.
33-00066EFS—05
button to move to the next
button to move to the
DoaIol Inrol Madorl
Finding Networks
Select Wi-Fi Network
Enter Password
Press Here to Edit
Delete
AC
2
Wi-Fi Setup
Installer Options
Please Wait
Your Network
Space
Connection
Successful
M35352
M35349
M35347
M35350
M35346
M35360
M35351