Technoline WS-9215 Manual De Instrucciones página 43

To set the clock:
1. The hour digits start flashing in the time display section.
2. Use the + key to adjust the hours and then press SET key to go to the minute setting.
3. The minute will be flashing. Press the + key to adjust the minutes.
4. Confirm with the SET key and enter the Calendar setting
Note:
The unit will still try to receive the signal despite a manual setting. When the signal is
received, the manually set time will automatically be replaced by the received time. During
reception attempts, the DCF tower icon will flash. If reception has been unsuccessful, the
DCF tower icon will not appear but reception will still be attempted.
CALENDAR SETTING
The clock can display year, month and day in setting mode.
Year (flashing)
43