Indesit IDCA G35 Manual De Instrucciones página 3

Ocultar thumbs Ver también para IDCA G35:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Condenser unit - remove any fluff build-up
from the condenser on a monthly basis.
Step 1
Open the condenser cover
- grip the handle and pull
towards you.
Step 2
Remove the condenser by
turning the 3 catches, then pull
the condenser towards you. (It is
normal for some residual water
to be left in the tubes).
Step 3
Clean the condenser with
running water over the rear side
to remove any fluff deposits.
Step 4
Replace the condenser unit;
make sure that the unit is
securely in place, that all 3
catches are fixed and that the
position arrows on the front end
of the condenser are pointing
upwards.
Failure to clean the condenser unit may cause
premature failure of the dryer.
EN
3

Publicidad

Tabla de contenido
loading

Tabla de contenido