Promise Technology SUPERTRAK EX8300 Guia De Inicio Rapido página 5

Step 2: Install the SuperTrak EX8350 Card
The SuperTrak EX8350 card fits into any available 3.3-volt PCI-Express X4 slot.
You can also plug the SuperTrak card into a PCI-Express X8 or X16 slot.
1. Remove the cover of your system.
2. Remove the inside slot cover of an available PCI-Express slot on the
motherboard.
3. Install the SuperTrak card into the open slot (above).
4. Fasten the SuperTrak card bracket to the system case (above).
5. Attach your system case's 2- or 4-pin LED cable to the LED connector on the
SuperTrak card (see page 7).
Step 2: Install the SuperTrak EX8350 Card
5